This guide is written to perform a SOLIDWORKS Standalone installation. If you are using a network license, please refer to our article How To Install The SolidNetWork License Manager Client.
A SOLIDWORKS Standalone license can be used to activate SOLIDWORKS on one machine. If you wish to use your activation on another system, you must first deactivate your standalone license from the PC it is currently active on. Please see the SOLIDWORKS End User License Agreement if you have any questions regarding this policy.
This is not a troubleshooting guide. If you have any technical issues with SOLIDWORKS, please contact Technical Support.
This document is only to be distributed and used by Hawk Ridge Systems customers. Any other use is prohibited.
Before Installation
Hawk Ridge Systems recommends taking a moment before installing SOLIDWORKS and checking that you are ready to load your new software by going through the points in the article Before Installing SOLIDWORKS Products.
Basic Installation
You will need to download the SOLIDWORKS Installation Manager to download and install your SOLIDWORKS standalone installation. The installation uses the same Installation Manager as other SOLIDWORKS products.
-
Using a web browser, go to the SOLIDWORKS Downloads page and select Access Downloads. You will need to log in with your 3DEXPERIENCE ID. Please note that you will need a subscription to access the SOLIDWORKS download page. If you cannot access this webpage, and you have purchased a license from Hawk Ridge Systems, please contact Technical Support.
-
Using the Version drop-down list, select the year version you wish to install. Then select the Download button for the specific SOLIDWORKS Service Pack (SPXX) you wish to download.
-
On the License Agreement page, scroll to the bottom and click on Accept and Continue.
- The SOLIDWORKS setup.exe should then begin to download.
-
Press the Open or Save button on the dialog box that comes up. (If no dialog appears, be sure the security settings of your internet browser are set to allow downloads.) After the installation has finished, you can delete the Setup download since it will not be needed to run SOLIDWORKS. The download will have the SOLIDWORKS installation manager included as well.
-
A self-extracting file, SolidWorksSetup.exe, will be downloaded to the location specified in the last step.
Note: Windows has been known to block these files. To confirm your file is not blocked and will run correctly, please right-click the file, select Properties, and then choose to Unblock the file. - To run the self-extractor, you can either right-click and choose Run as Administrator or Double-click this file.
-
Press the Yes button if a security warning box appears.
The executable will now launch the auto-extractor dialog box, which will extract the SOLIDWORKS Installation Manager files to a location on this machine. Keep the When done unzipping open: sldim\sldim.exe check box active to immediately run the program. Press the Unzip button to continue.
- When the file unzipping has completed, a dialog box will appear showing that the files were successfully unzipped. Press OK to continue to start the installation manager. If it does not start, locate Setup.exe in the extracted files and double-click it to launch the installation manager.
- If you receive a Windows reboot message like the one below, click OK. This warning only applies to SQL-based products like SOLIDWORKS Electrical.
- When the welcome screen opens, please select Install on this computer.
- Next, you should confirm any serial numbers that are pre-populated, or type in your SOLIDWORKS serial numbers. If you are unable to find your serial number and it was purchased through Hawk Ridge Systems, please call us or send us an email, and we can send you your SOLIDWORKS License serial number to a previously established email address.
- Exit all other programs and click the Next button to continue. For a computer with an existing SOLIDWORKS installation, you can install a new standalone installation concurrently, and it will create all new files, templates, etc., for the SOLIDWORKS year version (typically) without affecting old templates, etc. You are also given the option to upgrade an existing SOLIDWORKS installation.
- Press Next to continue. If you are not online, SOLIDWORKS will warn you that you cannot automatically select products to install, as it is not able to validate the products you are entitled to with your license. Pressing Cancel will continue with the installation, but you must manually select all your add-ins during the installation instead of being provided with a list of add-ins and products based on the serial numbers you entered.
- You will see a summary of what will be installed. On this page, you can change things like download options, products to install, where to install SOLIDWORKS (default is best here), and Toolbox Settings.
- By selecting Change next to the Products summary, you can edit the products you want to install. Select the SOLIDWORKS software and features to install by expanding each selection group and checking the boxes, then click Back to Summary.
- To change the Toolbox settings, click Toolbox/Hole Wizard Options Change, and you will see a window similar to the image below. When installing a new installation of SOLIDWORKS alongside an older year version, you can rename the new toolbox C:\SOLIDWORKS Data 20XX to differentiate it from older SOLIDWORKS year versions installed on your computer. If you are upgrading an installation, you can choose to create a new one, upgrade an existing Toolbox, or copy an existing Toolbox and upgrade that copy.
- Click back to the summary page, accept the terms of the SOLIDWORKS License Agreement, then click Download and Install or Install only if you already have all the installation files.
Standalone Activation
SOLIDWORKS Standalone licenses are activation-based licenses. The first time SOLIDWORKS is launched, it will bring up the activation wizard. Follow the instructions in our guide: How to Activate SOLIDWORKS Products to activate your license.
Once SOLIDWORKS is activated, you will be able to use the product. Please note that if you need to install SOLIDWORKS on a new machine, please deactivate the license of the machine that is no longer going to be used; then activate your license for your new installation.
Your standalone installation of SOLIDWORKS is now properly installed and licensed.
For additional support, existing customers can submit a ticket or new customers can contact Hawk Ridge Systems.
Comments
Article is closed for comments.