How to Add Textures to an Appearance in SOLIDWORKS Visualize 2024 and Newer

Problem

Adding appearances to a model in Visualize is the first step in any project, big or small. You can enhance appearances even more by adding textures. They will help improve the realism of appearances and make your models that much more photorealistic. In this article, we’ll discuss the process of adding textures to appearances for SOLIDWORKS Visualize 2024 and newer. For SOLIDWORKS Visualize 2024 and newer, review this article:

How to Add Textures to an Appearance in SOLIDWORKS Visualize 2023 and Earlier

Solution

With the addition of Dassault Systèmes' Enterprise PBR Shading Model (DSPBR) and restructured parameters for appearances, SOLIDWORKS Visualize 2024 and newer have a new interface for adding texture.

Note: The "Texture" and "Texture Mapping" sections of an appearance will show no controls if you haven't added a texture file to the respective parameters, such as albedo and roughness.

Below is an example of applying texture onto a sphere model, making it into a shiny and patterned bowling bowl.

  1. I have added the appearance of "Polished Aluminum" to a sphere. The appearance name doesn't really matter to me right now; what I'm looking for is a default shininess that I can play with.
    a sphere with polished aluminum appearance applied, very shiny.png
  2. To add texture(s) to this appearance, go to the Appearance tab and select "Polished Aluminum". It can be seen in its "General" section that this appearance has the appearance type Metal and parameters listed under Base. Depending on which appearance type is chosen, different parameters would appear.click on appearance to show its appearance type and parameters.png
  3. To add a texture akin to adding decals/colors onto the geometry, I will use the plus sign right under Albedo to browse and select an appropriate image file.plus sign right under parameter name hightlighted.png
  4. I have chosen the image "Chipboard Albedo". It now has an interesting wooden look but also a metallic look to the sphere.chipwood texture applied on the metallic ball.png
  5. You can adjust the roughness value right now in the "General" section to reduce the reflectiveness of the surface. I will keep my roughness value at 0.1 and move to the "Texture" section of this appearance.
  6. We now see that in the "Texture" section, a box named "Albedo" has been added. If during Step 3, we have added a texture file to Roughness instead, it would show a box named "Roughness" instead. If multiple textures have been added in the "General" section, multiple boxes will be added, and you can adjust each texture's parameters after selecting each box.where the texture boxes would appear.png
    There are many parameters that you can adjust as well. A full list of texture parameters and their definitions can be seen here: Texture Parameters
  7. I am adjusting the brightness, hue, saturation, and lightness to create a color and look that I like. The end result looks like the following picture.end result after adjusting hue, saturation, lightness, and brightness.png
  8. In the last section, "Texture Mapping", you can change the mode of mapping and adjust how the mapping lays out. For example, you would likely prefer UV/spherical for a ball shape instead of planar to make the texture look more natural.visual comparison between spherical and planar mapping mode after color change.png
    You can find more detailed definitions of the mapping modes here: Texture Mapping

Color Mapping

Color mapping does exactly what its name suggests: it allows you to add a color or an image to your appearance. This color or image will be applied everywhere that the appearance is applied, so if your appearance is placed on the entirety of a model, you’ll see the color map propagated to all faces of the model (as opposed to a decal, which is applied on a face-by-face basis).

Color_Texture.png

Above, we can see that the color map applied to the appearance has been applied not only to the spline surface but also to the bottom face of the model. This is because this particular appearance has been applied to the model as a whole, and so the color map is applied to all faces.

Specular Maps

Specular maps control the “glossiness” of a model’s appearance. Here’s an example of a specular map:

Cast Specular

While it looks like a mess of whites, blacks, and greys, when read as a specular map, each of those colors represents a certain amount of brightness that will be applied to a model’s appearance. Observe the model without a specular map (left) and with a specular map (right):

Black Appearance Black Spec

You can see how, as soon as the specular map shown above was applied to the sphere, the model was covered in darker and lighter areas of light. These speckles coincide with the darker and lighter colors in the specular map itself, and, when combined with a bump map, can simulate realistic lighting across a textured surface.

Alpha Maps

An alpha map controls the transparency of a model’s appearance. It essentially reads a greyscale image in order to know where to apply transparency to a model and with what strength. If you were to open an alpha image file by itself, you’d see that an alpha map looks very similar to a specular map: an image of whites, grays, and blacks.

We can see the effects of an alpha map by loading the above specular map from above as an alpha map:

Black_Appearance.png Cast_Alpha_.png

If we observe the picture on the right, we can still vaguely make out a spherical shape, but we can see that almost all of the sphere has been rendered transparent.

On a practical level, this type of alpha map is completely useless, but it does demonstrate exactly what an alpha map does.

Bump Maps

Bump maps simulate actual texturing across the surface of a model. Bump maps are responsible for most of the photorealism you’ll see in your model and will more accurately simulate what a material will look like as you apply it to your model.

A bump map is another image file that looks something like these:

carbon normal Cast Normal

Again, each color in a bump map is translated into the software to simulate a realistic, textured look on the surface.

Let’s take a look at a non-textured sphere and a sphere with a bump map applied to it:

Black Appearance Black Bump

We can see that as the bump map is applied, the surface of the sphere takes on the appearance of an actual material, rather than a smooth sphere.

Finding Additional Texture

By default, texture files are located in C:\Users\[USERNAME]\Documents\SOLIDWORKS Visualize Content, but you can change this directory at any time by going to Tools -> Options -> General.

Cloud Library

You can also find more textures by clicking on the “File Libraries” tab in your palette, clicking on the “Cloud” option, and changing the category to “Textures”:

Texture Library

After that, you can simply double-click and download any textures that you would like to use. Since textures are just image files, you can download any image file you’d like to use as a texture.

For additional support, existing customers can submit a ticket or new customers can contact Hawk Ridge Systems. 

Was this article helpful?
0 out of 0 found this helpful

Articles in this section

Comments

0 comments

Article is closed for comments.