How to Use Configurations in SOLIDWORKS Visualize

Problem

This article discusses how to create configurations in SOLIDWORKS Visualize Professional and explores their abilities and applications. Configurations within SOLIDWORKS Visualize can be very helpful if you wish to have different variations of model appearance and scene within one project. Note that 'configuration' here refers to 'display' configurations and only applies to variations of appearance, visibility state, and scene, whereas model configurations are not supported in current Visualize versions.

Solution

Let’s take a look at the Configuration Tools. It is located on the left side of the main toolbar and shows that “Base Configuration” is set as the default.

Config tab

 

When expanding the Configuration Tools, you see the following options:

  • Create new Configuration
  • Duplicate active Configuration
  • Rename Configuration
  • Lock Configuration

Note: If a configuration is duplicated, be sure to apply a new appearance or copy/paste an existing one. If we change the settings (i.e., color) of an appearance of the original configuration in the new configuration, we will see the change applied to any configuration that shares this appearance. The same concept applies to scenes and environments. 

Changing the appearance originally applied in the previous configuration will override the appearance for both the new and previous configurations. In the two example images below, there are two configurations called "Base Configuration" and "Test" that use the same configuration. The main appearance is red to start.

Red apperance

Then we changed the color to blue, which changes the appearance for both configurations, as they use the same appearance.

Appearance changed to blue in both configs

A better approach would be to copy the existing appearance or scene, or insert a new appearance that we can apply to the model. The changes in the new configuration will not affect the previous configuration.

For additional support, existing customers can submit a ticket or new customers can contact Hawk Ridge Systems.

Was this article helpful?
0 out of 0 found this helpful

Articles in this section

Comments

0 comments

Article is closed for comments.