1. Hawk Ridge Systems
  2. Analysis
  3. SOLIDWORKS Flow Simulation

SOLIDWORKS Flow Simulation Learning Resources

Avatar
David Severud

SOLIDWORKS Flow Simulation allows you to design high-performing products by quickly testing the effects of the flow of air, liquids, and heat at any time during your design phase.

Below are some helpful learning resources to get started with SOLIDWORKS Flow Simulation which is broken down into three different categories.

Within SOLIDWORKS:

Inside SOLIDWORKS, open a Part or Assembly file, and turn the Flow Simulation Add-in on from the SOLIDWORKS Add-ins tab in the Command Manager or by going to Tools>Add-ins.

Enable Flow Simulation from Add_ins tab or Tools.png

With the Flow Simulation Add-in turned on, the Flow Simulation Tutorial, Technical Reference, API Help Topics, and User Guide can be accessed from the help dropdown at the top right (questions mark icon).

  • Help > SOLIDWORKS Simulation> Flow Simulation Tutorial
    Example Files: C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Flow Simulation\Examples
  • Help > SOLIDWORKS Simulation>Flow Simulation Technical Reference
    Validation Document: C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Flow Simulation\lang\english\Docs
    Validation Files: C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Flow Simulation\Validation Examples
  • Help > SOLIDWORKS Simulation>Flow Simulation API Help Topics
  • Help > SOLIDWORKS Simulation> Flow Simulation User Guide

Help Dropdown for Flow Simulation.png

Hawk Ridge Systems Sites:

SOLIDWORKS Sites:

For technical support, please contact Hawk Ridge Systems at 877.266.4469 for the U.S. or 866.587.6803 for Canada and support@hawkridgesys.com.

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section