Follow

SOLIDWORKS PCB 2021 Client-Server Installation Guide

Garrett Howe

This guide gives instructions for installing SOLIDWORKS PCB 2021. It is written for client-server installations of SOLIDWORKS PCB 2021. In this configuration, SOLIDWORKS PCB Services (or Altium Vault) is installed on a server system, and SOLIDWORKS PCB is installed on client systems. This is a shared configuration where a server computer hosts SOLIDWORKS PCB Services (or Altium Vault) data, while client computers run either SOLIDWORKS PCB, SOLIDWORKS PCB Connector and/or the SOLIDWORKS PCB Add-In. Please contact Hawk Ridge Systems Technical Support if you are unsure of your SOLIDWORKS PCB configuration type.

SOLIDWORKS PCB 2021 uses the same installation manager as other SOLIDWORKS products, including the 3D CAD software. If upgrading other SOLIDWORKS products, along with SOLIDWORKS PCB 2021, please also refer to their upgrade guides for further instructions.

 This is not a troubleshooting guide. If you have any technical issues with SOLIDWORKS PCB, please contact Hawk Ridge Systems technical support. This document is only to be distributed and used by Hawk Ridge Systems customers. Any other use is prohibited.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments