This article provides a reference list for symbol and title block attributes in SOLIWORKS Electrical 2015, with some notes on usage. The majority of these attributes also apply to SOLIDWORKS Electrical 2014.
This is not a troubleshooting guide. If you have any technical issues with SOLIDWORKS Electrical, please contact Hawk Ridge Systems Technical Support.
SYMBOLS
|
ATTRIBUTE DESCRIPTION |
ATTRIBUTE TAG |
|
Properties of Symbol/Component |
|
|
Marks |
|
|
Full mark |
#TAG |
|
Short mark |
#SHORT_TAG |
|
Parent mark |
#PARENT_TAG |
|
General data |
|
|
Description 1 |
#COM_TZ_0_L1 |
|
Translatable data 1 2 |
#COM_TZ_1_L1 |
|
Translatable data 2 |
#COM_TZ_2_L1 |
|
User data 1 |
#COM_TX_0 |
|
User data 2 |
#COM_TX_1 |
|
Manufacturer data |
|
|
Type |
#TD_3 |
|
Degree of protection (IP code) |
#TD_5 |
|
Specific Properties of Terminals |
|
|
Marks |
|
|
Terminal mark |
#TER_TAG (or #SHORT_TAG) |
|
Terminal strip mark |
#TER_TAG1 (or #PARENT_TAG) |
|
Manufacturer data |
|
|
Section |
#TD_2 |
|
Shunt (0/1) |
#TD_3 |
|
Level number |
#TD_4 |
|
Acc. terminal |
#TD_5 |
|
Step |
#TD_6 |
|
Properties of Associated Manufacturer Part |
|
|
Manufacturer |
#REF_DES_1 |
|
Manufacturer part reference |
#REF_DES_2 |
|
Article number |
#REF_ART_NUM |
|
Description |
#REF_TZ_0_L1 |
|
Commercial reference |
#REF_TZ_1_L1 |
|
Translatable data 2 |
#REF_TZ_2_L1 |
|
User data 1 3 |
#REF_TX_0 |
|
User data 2 |
#REF_TX_1 |
|
Properties of Component Location and Function 4 |
|
|
Location/Function mark |
#LOC_TAG |
|
Description |
#LOC_TZ_0_L1 |
|
Translatable data 1 |
#LOC_TZ_1_L1 |
|
Translatable data 2 |
#LOC_TZ_2_L1 |
|
User data 1 |
#LOC_TX_0 |
|
User data 2 |
#LOC_TX_1 |
Notes
1 Translatable data attributes can be shown in different languages by editing the “L1” suffix of the attribute tag. L1 refers to Language 1 of the project and can be changed to L2 to refer to Language 2, and so on. It can also be changed to the language code, e.g. EN for English.
2 For all types of user and translatable data attributes (including Description), numbers beyond 1 and 2 can be used by changing the relevant number in the attribute tag. E.g. The tag for User data 3 is …_TX_2 while that for Translatable data 3 is …_TZ_3_L1.
3 If using an ERP database connection, the User data attributes will correspond to the user data fields in the ERP database for that manufacturer part.
4 The attribute tags for function are the same as those for location but with LOC replaced by FUN.
TITLE BLOCKS
|
ATTRIBUTE DESCRIPTION |
ATTRIBUTE TAG |
|
Properties of Project |
|
|
Project name |
#PROJECT_TAG |
|
Contract number |
#PROJECT_CONTRACT_NUM |
|
Customer name |
#PROJECT_CUSTOMER |
|
Customer address (line 1) |
#PROJECT_CUSTOMER_ADDRESS_1 |
|
Customer address (line 2) |
#PROJECT_CUSTOMER_ADDRESS_2 |
|
Customer address (line 3) |
#PROJECT_CUSTOMER_ADDRESS_3 |
|
Design office |
#PROJECT_DWG_OFFICE |
|
Design office address (line 1) |
#PROJECT_DWG_OFFICE_ADDRESS_1 |
|
Design office address (line 2) |
#PROJECT_DWG_OFFICE_ADDRESS_2 |
|
Design office address (line 3) |
#PROJECT_DWG_OFFICE_ADDRESS_3 |
|
Project creation date |
#PROJECT_CREATION_DATE |
|
Project modification date |
#PROJECT_MODIFICATION_DATE |
|
General data |
|
|
Description 1 |
#PROJECT_TZ_0_L1 |
|
Translatable data 1 2 |
#PROJECT_TZ_1_L1 |
|
Translatable data 2 |
#PROJECT_TZ_2_L1 |
|
User data 1 |
#PROJECT_TX_0 |
|
User data 2 |
#PROJECT_TX_1 |
|
Properties of Book |
|
|
Marks |
|
|
Book mark |
#BUNDLE_TAG |
|
General Data |
|
|
Description |
#BUNDLE_TZ_0_L1 |
|
Translatable data 1 |
#BUNDLE_TZ_1_L1 |
|
Translatable data 2 |
#BUNDLE_TZ_2_L1 |
|
User data 1 |
#BUNDLE_TX_0 |
|
User data 2 |
#BUNDLE_TX_1 |
|
Revisions 3 |
|
|
Current index |
#REV_NO |
|
Specified index |
#REV_NO_0 |
|
Creation date |
#REV_CREATED_ON_0 |
|
Created by |
#REV_CREATED_BY_0 |
|
Check/Verification date |
#REV_VERIF_ON_0 |
|
Checked/Verified by |
#REV_VERIF_BY_0 |
|
Acceptance/Approval/Validation date |
#REV_APPROV_ON_0 |
|
Accepted/Approved/Validated by |
#REV_APPROV_BY_0 |
|
Description |
#REV_NO_0_TZ_0_L1 |
|
User data 1 |
#REV_NO_0_TX_0 |
|
User data 2 |
#REV_NO_0_TX_1 |
|
Translatable data 1 |
#REV_NO_0_TZ_1_L1 |
|
Translatable data 2 |
#REV_NO_0_TZ_2_L1 |
|
Properties of Folder |
|
|
Marks |
|
|
Folder mark |
#FOLDER_TAG |
|
General Data |
|
|
Description |
#FOLDER_TZ_0_L1 |
|
Translatable data 1 |
#FOLDER_TZ_1_L1 |
|
Translatable data 2 |
#FOLDER_TZ_2_L1 |
|
User data 1 |
#FOLDER_TX_0 |
|
User data 2 |
#FOLDER_TX_1 |
|
Properties of Drawing |
|
|
Marks |
|
|
Drawing mark |
#FOLIO_TAG |
|
Next drawing mark |
#NEXT_FOLIO_TAG |
|
Previous drawing mark |
#PREV_FOLIO_TAG |
|
Mark of the last drawing in the book |
#LAST_FOLIO_IN_BUNDLE |
|
Quantities |
|
|
Number of drawings in the book |
#NB_FOLIO_IN_BUNDLE |
|
Position of drawing in book |
#FOLIO_POS |
|
Order number of drawing 4 |
#FOLIO_NO |
|
Scale factor – numerator |
#FOLIO_SCALE_NUM |
|
Scale factor – denominator |
#FOLIO_SCALE_DEN |
|
General Data |
|
|
Description |
#FOLIO_TZ_0_L1 |
|
Translatable data 1 |
#FOLIO_TZ_1_L1 |
|
Translatable data 2 |
#FOLIO_TZ_2_L1 |
|
User data 1 |
#FOLIO_TX_0 |
|
User data 2 |
#FOLIO_TX_1 |
|
Properties of Drawing Location and Function 5 |
|
|
Marks |
|
|
Location mark |
#FOLIO_LOC_TAG |
|
Short mark |
#FOLIO_LOC_SHORT_TAG |
|
Parent mark |
#FOLIO_LOC_PARENT_TAG |
|
General Data |
|
|
Description |
#FOLIO_LOC_TZ_0_L1 |
|
Translatable data 1 |
#FOLIO_LOC_TZ_1_L1 |
|
Translatable data 2 |
#FOLIO_LOC_TZ_2_L1 |
|
User data 1 |
#FOLIO_LOC_TX_0 |
|
User data 2 |
#FOLIO_LOC_TX_1 |
|
Miscellaneous |
|
|
SW Electrical version number |
#ELVER |
|
Name of software (i.e. SOLIDWORKS Electrical) |
#APP_NAME |
|
Drawing file name |
#NUM_DWG |
|
Column |
#COL |
|
Row |
#ROW |
Notes
1 Translatable data attributes can be shown in different languages by editing the “L1” suffix of the attribute tag. L1 refers to Language 1 of the project and can be changed to L2 to refer to Language 2, and so on. It can also be changed to the language code, e.g. EN for English.
2 For all types of user and translatable data attributes (including Description), numbers beyond 1 and 2 can be used by changing the relevant number in the attribute tag. E.g. The tag for User data 3 is …_TX_2 while that for Translatable data 3 is …_TZ_3_L1.
3 For revision attributes, the index code character (the 0 above) can be replaced by the following codes:
0 : 1st index; 1: 2nd index…; -0: last index; -1: second to last index…
Some of the properties of the current revision index can be referenced by removing the index code from the attribute (but keeping the underscore). E.g. #BUN_REV_CREATED_ON_ gives the creation date of the current index. This does not work for description, user data and translatable data attributes.
4 This attribute corresponds to the number of the automatic mark for the drawing, even if a different manual mark has been set.
5 The attribute tags for function are the same as those for location but with LOC replaced by FUN.
Comments
Is there a newer list for 2020 or later, please?
Please sign in to leave a comment.