2014 Inspection Install
SolidWorks Inspection Install Guide
Inspection Add-in/Standalone Install
Guide on installing the SolidWorks Inspection Add-in/Standalone
This guide is written for SolidWorks Inspection 2014. Note that SolidWorks Inspection is not part of the SolidWorks Installation Manager and will be added in SolidWorks 2015.
Before loading any software, you should always log in with full administrative permissions and disable your anti-virus and anti-spyware programs. The installation process has a Java component, be sure your operating system has been updated with Windows Updates recently to avoid any compatibility issues with the installer.
If you want to move a license to a new system, or from one machine to another, you must transfer that license back beforehand. See the license agreement if you are unsure about this policy.
This is not a troubleshooting guide. If you have any technical issues with SolidWorks Inspection please contact Hawk Ridge Systems technical support.
This document is only to be distributed and used by Hawk Ridge Systems customers. Any other use is prohibited.
Hawk Ridge Systems highly recommends taking a moment before installing SolidWorks Inspection to check that you are ready to load your new software. Follow these steps to have better performance using SolidWorks Inspection.
- Check hardware compatibility.
- Check System compatibility.
- Operating System: Microsoft Windows 7, Windows 8 (64-bit only) and Windows 8.1 (64-bit only).
- Microsoft Excel 2007, 2010, or 2013 (Note that Microsoft ‘Click To Run’ is not supported)
- Microsoft .Net Framework version 3.5 SP1
- SolidWorks 2014 SP3 or later
- Check hard drive for space and overhead.
- In Windows Explorer, go to My Computer and check destination drive (by default the C drive). Right-click this drive and choose Properties to see if it has the “Estimated installation size” (4.5 GB in this case) free required for the full program.
- Also, be sure this drive has at least 15% free space. A full disk may cause out-of-memory crashes and cannot be defragged to optimize performance.
Depending on your needs, installing SolidWorks might be necessary. If you want to create inspection documents from SolidWorks drawing files, you need to use and run the SolidWorks Inspection add-in. If you plan to use the SolidWorks Inspection add-in, you must install SolidWorks 2014 SP3.0 or later. If you work with PDF or TIFF files only, then you do not need to install SolidWorks 2014.
- Make sure you are logged in as the administrator.
- Disable all anti-virus and anti-spyware tools.
- Install/Update to SolidWorks 2014 SP3.0 or later.
- Download SolidWorks Inspection from the SolidWorks Customer Portal site and double-click the executable (.exe file) to begin the installation.
- Once started, the executable should bring you to the install wizard. Click next to continue.
- The next page will ask for your 4 digit serial number. If you have this information in a document, you can copy and paste this information into the first cell and it will fill out correctly. Click “Next” to continue.
- On the following page, you can set the install folder by clicking “Change”. If the default (C:\Program Files) is acceptable, simply hit “Next”.
- Clicking “Install” on the next page will begin the installation.
- Once the install is complete, simply click finish.
- Launch SolidWorks Inspection or turn on the SolidWorks Inspection add-in inside SolidWorks 2014 (tools>add-ins). You will be prompted to activate the SolidWorks products. Select SolidWorks Inspection and click “Next”.